MACtac PERMACOLOR® Enhancers High-Performance Cast Vinyl Film Series
MACtac PERMACOLOR® Enhancers: Add Sprarkle to your graphics and wraps with PERMACOLOR Enhancer series laminating films. Use with: B-Free GRUV GVC929BFD, GV729BFD and other print media.
Out of stock
SKU
6300Enhancer
MACtac PERMACOLOR® Enhancer film is a premium 2.5 mil (Crystal) and 3.0 mil (Silver Metallic) cadmium-free clear cast vinyl with high gloss and a high concentration of light refracting additives for a glistening appearance on the surface of your substrate or to use as an overlaminating film to greatly enhance your high quality graphics. These MACtac films are designed for high profile applications over flat to slightly curved surfaces. The products are coated with a high performance permanent, clear solvent acrylic adhesive that is protected with 78# bleached white kraft liner for good stability and layflat. These films are outstanding choices for creating unique effects in fleet marking, container decals,marine, logos, automotive, equipment identification, signs, etc.
Durability:
This product is good for 5 years outdoor durability. This use-life estimate is based upon accelerated age studies based on vertical applications under “normal” temperate climates. Please note that exposure to severe temperatures, ultra-violet light and also tropical, sub-tropical or desert regions will cause more rapid deterioration. This also applies to polluted areas, high altitude and south facing exposure.
Application:
Used as cut vinyl: Application of 6300 when used is cut-vinyl is made easier if MACtac pre-spacing tape is used, or can be applied as an overlaminating film with a standard laminator. Where exposures to chemical and solvent spills are likely to occur, edge sealing of decals with a varnish or clear coat will prevent edge lift. Correct varnishing of decals gives greater protection and longer end use life against any prolonged effect of weathering, abrasion and other erosive effects such as frequent cleaning.
Used as an Overlaminate for Vehicle Wraps: Because this is a much thicker overlaminate MACtac offers a limited warranty on flat to slightly curved surfaces. There is no warranty for Enhancers on motor vehicle wraps, over rivets and corrugations, through complex surfaces or for marine graphics.
Durability:
This product is good for 5 years outdoor durability. This use-life estimate is based upon accelerated age studies based on vertical applications under “normal” temperate climates. Please note that exposure to severe temperatures, ultra-violet light and also tropical, sub-tropical or desert regions will cause more rapid deterioration. This also applies to polluted areas, high altitude and south facing exposure.
Application:
Used as cut vinyl: Application of 6300 when used is cut-vinyl is made easier if MACtac pre-spacing tape is used, or can be applied as an overlaminating film with a standard laminator. Where exposures to chemical and solvent spills are likely to occur, edge sealing of decals with a varnish or clear coat will prevent edge lift. Correct varnishing of decals gives greater protection and longer end use life against any prolonged effect of weathering, abrasion and other erosive effects such as frequent cleaning.
Used as an Overlaminate for Vehicle Wraps: Because this is a much thicker overlaminate MACtac offers a limited warranty on flat to slightly curved surfaces. There is no warranty for Enhancers on motor vehicle wraps, over rivets and corrugations, through complex surfaces or for marine graphics.
| Condition | New |
|---|---|
| Laminate Brand | MACtac |
| Laminate Type | Pressure Sensitive |
Write Your Own Review